• LENS INSTALLATION

Fitting Sublime Optics lenses into sunglasses is straightforward and can be done yourself. You rarely would need to visit an optician or sunglasses retailer to install the lenses for you. Follow our simple step by step guides. If you need any help at all please contact us and we would be more than happy to help:

Plastic Frame (2 lenses)

1. Fit the outer edges

2. Fit the top inside edge by pushing in and flexing the lens a little

3. fit the bottom inside edge

Plastic Frame (single 1 piece lens)

1. insert the bridge are (above the nose) part in first and push the top and bottom part in so that it 'snaps' into place

2. going around the edge of the lens (one eye at a time), work in the lens so it clicks into place. (note the outer edges are tight, and require a little flexing of the lens inward)

Metal Frame

1. Unscrew the small screws completely with the tool provided

2. Remove the original lenses

3. Without the new lenses in the frame, screw in the screws loosely so that the frame is joined, but at the end of the screw.

4. Insert the new lenses making sure they are completely in the frame by:

a. Fit the outer edges

b. Fit the top inside edge by pushing in and flexing the lens a little

c. fit the bottom inside edge

5. Tighten the screws so the lens sits firmly within the frame.

Ray Ban Wayfarer Specific

1. Fit the outer edges

2. Fit the top inside edge by pushing in and flexing the lens a little

3. fit the bottom inside edge